We are Hubcaps Plus so Much More!

Archive for the 'Hubcaps' Category...

Filed under Chrome Trim, Hubcaps

Set of Four Replica 17 inch For Fusion Chrome Bolt On Hubcaps

Set of Four Replica 17 inch Ford Fusion Chrome Bolt On Hubcaps


This is a set of (4) four bolt on chrome hubcaps which are designed to fit the following Ford vehicles:

These are not used factory hubcaps, they are brand new replica hubcaps. A replica or reproduction wheel cover is manufactured to closely resemble a factory original equipment hubcap at a fraction of the cost. For more information on replica hubcaps please click here. Our replica hubcaps run up to 75% less than the factory hubcaps from a dealer

Please keep in mind that these caps are not original equipment hubcaps so if you are looking to replace one of your factory hubcaps there will be some slight differences. If you would prefer we may have used factory hubcaps available at great prices for your vehicle. To search our database of original equipment hubcaps and wheelcovers,which includes; hubcaps, wheel covers, center caps, wheels, head lights, tail lights, fog lights, side marker lights and mirrors click the link below.
Search for original equipment hubcaps and wheelcovers by make, model and year.

When checking tire size it’s not necessary to measure anything. All tires have a “size series” printed on them that contains the wheel/rim size. The last two digits following the R denote your wheel/rim size. If you are unsure of your rim/wheel size please refer to the diagram on the size matters page.

If you have any questions, as always we value your feedback, you can contact us via the “Contact Us” link to the right, or if you prefer to call us we are here to answer your questions Monday through Friday 9 AM/CST – 5 PM/CST toll free at 1-888-482-2279!

Comments (1) Posted by Bill H. on Monday, January 17th, 2011

Filed under Hubcaps, Tips & Tutorials, VW Hubcaps

Hot on the heels of the current retro-chic trend that has completely taken over the automotive industry Volkswagen is now making the old school blue and white VW logos available on their 16″ Beetle Hubcaps. Check it out below…

Volkswagen Beetle 16 inch 1998-2001 New Factory Original Equipment Hubcap With Blue and White Logo

Personally… I like the 16″ VW Beetle hubcaps with the blue and white Volkswagen logo. The Beetle is a retro-chic car, so I think the retro-chic blue and white logo adds a little style to the hubcap. You can see a picture of the 16″ Volkswagen Beetle hubcap with the modern black and chrome VW logo for comparison below…

16

I think the modern black and chrome Volkswagen logo looks better on the Volkswagen Jetta hubcaps and the Volkswagen Passat hubcaps which have the European Sedan styling. the Beetle definitely looks better with the retro look… What do you think? Which Volkswagen hubcaps do you prefer?

If you have any questions, as always I value your feedback, you can contact me via the “Contact Us” link to the right, or if you prefer to call me directly I am here to answer your questions Monday through Friday 9 AM/CST – 5 PM/CST toll free at 1-888-482-2279!

Comments (148) Posted by Bill H. on Thursday, January 13th, 2011

Filed under Baby Moon Hubcaps, Hubcaps, Tips & Tutorials

Baby Moon Hubcaps available at HubcapsPlus.com.There is definitely a retro styling trend in the automotive industry today, as evidenced by the popularity of the throwback designs of the new Mustang, the new Challenger and the new Camaro, it seems that everything that was old is new again! It would seem that consumers are hearkening back to their glory days, trying to recapture at least a part of their youth.

So it’s no surprise at all that there has been a renewed interest in baby moon hubcaps… You remember baby moon hubcaps don’t you? Those chrome smoothies gleaming in the sun usually coupled with extra wide whitewalls… They were the epitome of cool! Well folks guess what? They are the epitome of cool again.

If you want to give your ride a new look with retro style this is an easy choice… There are however a few things to keep in mind. Baby moon hubcaps don’t attach like regular hubcaps, they are held on via the nubs found on the crown of your wheel. If you are replacing an existing set of baby moon hubcaps, the easiest way to determine the size is to just take baby moon hubcap off of the wheel, flip it over and measure the inside diameter of the cap. If you don’t have existing baby moons, then use the diagrams below.

Baby Moon installation instructions.

The rule of thumb for fitment is as follows:

If your measurement is between 8″ & 9″, then the 8″ baby moon hubcaps will be compatible.

If your measurement is between 9″ & 10″, then the 9″ baby moon hubcaps will be compatible.

If your measurement is 10″ & up, then the 10″ baby moon hubcaps will be compatible.

If you have any questions, as always I value your feedback, you can contact me via the “Contact Us” link to the right, or if you prefer to call me directly I am here to answer your questions Monday through Friday 9 AM/CST – 5 PM/CST toll free at 1-888-482-2279!

Comments (5) Posted by Bill H. on Tuesday, January 11th, 2011

Filed under Hubcaps, Tips & Tutorials

If you have a Dodge Caravan then you know its dirty little secret. The Dodge Caravan hubcaps are prone to coming off at the most inopportune times. In fact the Dodge Caravan throws more hubcaps than any other vehicle I know! I’m not sure if it’s just a flawed concept and completely unintentional or if it’s a sinister plot to get consumers to purchase more hubcaps… Either way it amounts to a serious pain in the neck… And in the pocketbook for Dodge Caravan owners.

Replacement Caravan hubcaps, if purchased from a dealership can run you upwards of $75.00 per cap! That can run into quite a bit of scratch after several lost caps.

But did you know that replica hubcaps are available for almost every make and model vehicle on the road today? Including Dodge Caravan replica hubcaps? Replica hubcaps are designed to resemble factory hubcaps in almost every way with one BIG difference… Replica hubcaps usually run about 75% less then the factory caps from a dealer.

Granted as they are replica hubcaps they will not have the manufacturers logo. Logos are the legal trademark of the individual manufacturer or manufacturers, and as such it would be trademark infringement to include them on a replica cap. But for the cost of one factory hubcap you can generally purchase an entire set of four replica hubcaps!

Look at what is available for Dodge Caravan owners…

Set of Four Replica 1996 - 2000 15 inch Dodge Caravan and Dodge Mini Van Hubcaps

A Set of Four Replica 1996 – 2000 15 inch Dodge Caravan and Dodge Mini Van Hubcaps for $49.99 Shipped!

Set of Four Replica 1996 - 1999 16 inch Dodge Caravan Hubcaps and Dodge Mini Van Hubcaps

A Set of Four Replica 1996 – 1999 16 inch Dodge Caravan Hubcaps and Dodge Mini Van Hubcaps for $52.99 Shipped!

Don’t pay dealership prices to replace those lost Dodge Caravan hubcaps! Buy replicas instead!

If you have any questions, as always I value your feedback, you can contact me via the “Contact Us” link to the right, or if you prefer to call me directly I am here to answer your questions Monday through Friday 9 AM/CST – 5 PM/CST toll free at 1-888-482-2279!

Comments (2) Posted by Bill H. on Sunday, January 9th, 2011

Filed under Hubcaps, New Items, Tips & Tutorials

Set of Four Replica 16 inch Ford Crown Victoria Chrome Bolt On Hubcaps

Set of Four Replica 16 inch Ford Crown Victoria Chrome Bolt On Hubcaps


This is a set of (4) four bolt on chrome hubcaps which are designed to fit the following Ford vehicles:

This set of (4) four 16″ 2003-2006 Ford Crown Victoria chrome hubcaps is held on by the vehicle’s lug nuts to deter theft, promote reliability of the cover and prevent the hubcaps from falling off. The threaded bolt caps are included as pictured below.

Set of Four Replica 16 inch Ford Crown Victoria Chrome Bolt On Hubcaps with Threaded Bolt Caps

Set of Four Replica 16 inch Ford Crown Victoria Chrome Bolt On Hubcaps with Threaded Bolt Caps

These are not used factory hubcaps, they are brand new replica hubcaps. A replica or reproduction wheel cover is manufactured to closely resemble a factory original equipment hubcap at a fraction of the cost. For more information on replica hubcaps please click here. Our replica hubcaps run up to 75% less than the factory hubcaps from a dealer

Please keep in mind that these caps are not original equipment hubcaps so if you are looking to replace one of your factory hubcaps there will be some slight differences. If you would prefer we may have used factory hubcaps available at great prices for your vehicle. To search our database of original equipment hubcaps and wheelcovers,which includes; hubcaps, wheel covers, center caps, wheels, head lights, tail lights, fog lights, side marker lights and mirrors click the link below.
Search for original equipment hubcaps and wheelcovers by make, model and year.

When checking tire size it’s not necessary to measure anything. All tires have a “size series” printed on them that contains the wheel/rim size. The last two digits following the R denote your wheel/rim size. If you are unsure of your rim/wheel size please refer to the diagram on the size matters page.

If you have any questions, as always we value your feedback, you can contact us via the “Contact Us” link to the right, or if you prefer to call us we are here to answer your questions Monday through Friday 9 AM/CST – 5 PM/CST toll free at 1-888-482-2279!

Comments (1) Posted by on Sunday, December 26th, 2010